Mechanical reasoning tests explained

Short answer: a mechanical reasoning test asks how everyday machines and physical forces behave: gears, levers, pulleys, balance and simple circuits. It is used for roles that operate, maintain or repair equipment. You do not need an engineering degree, but you do need to reason about how things move.

What it measures

Criteria says its Mechanical Reasoning Assessment (CMRA) measures mechanical aptitude and reasoning ability, and can predict performance in occupations involving the operation, maintenance and servicing of tools, equipment and machinery (Criteria CMRA). Pearson TalentLens says its Bennett Mechanical Comprehension Test (BMCT-II) measures the ability to solve technical problems, quickly learn mechanical concepts and apply physical principles (Pearson TalentLens).

Formats you may see

  • Criteria CMRA. Criteria’s info brief says up to 30 questions, timed, up to 15 minutes (Criteria info brief). Criteria’s page shows a sample question about how a part moves when another moves in the direction of an arrow.
  • Pearson BMCT-II. Pearson lists 55 items, 25 minutes, timed and unsupervised (Pearson TalentLens).
  • Criteria Wiesen test (WTMA). Criteria describes it as a 30-minute, 60-item test of mechanical aptitude (Criteria WTMA).
  • In combined tests. Saville includes mechanical reasoning in its aptitude range lineup (Saville practice tests).

These are separate tests. Check your invitation for yours.

How to answer

  1. Picture the machine. Sketch it on paper if you are allowed one.
  2. Decide what moves, in which direction, and what it pushes or pulls.
  3. Use the simple rules: meshing gears turn in opposite directions, and a longer lever arm needs less force.
  4. Check that your answer makes physical sense.

Three original worked examples

Written by Prepti. They are not official questions.

Example 1. Gears.

Gear A turns clockwise and meshes with gear B. Gear B meshes with gear C. Which way does C turn?

Answer: Clockwise. A turns clockwise, so B turns counterclockwise, and C turns clockwise.

Example 2. Balance.

A 20 kg child sits 3 m from the pivot of a see-saw. Where must a 30 kg child sit on the other side to balance?

Answer: 2 m from the pivot. Balance means weight times distance is equal: 20 x 3 = 60, so 30 x d = 60 and d = 2.

Example 3. Lever.

You lift a loaded wheelbarrow by its handles. Is it easier to lift with your hands near the end of the handles, or near the middle?

Answer: Near the end. The longer the distance from the wheel (the pivot), the less force you need.

Practice lab: gears, belts and balance

Original practice written by Prepti. Not official questions. Each setup is described in words as well as drawn, so you can answer from the text alone.

Model note: treat everything as idealized. Bars are rigid and weightless, and friction is negligible unless a question says otherwise.

1. Two external gears mesh. Gear A turns clockwise. Which way does gear B turn? Two meshing gears Gear A on the left with a clockwise arrow, gear B on the right touching it. Their teeth mesh at one point between the centers. A turns clockwise B ?

Schematic, not to scale. In words: gear A meshes with gear B at one contact point between their centers. A turns clockwise.

Worked answer

Answer: counterclockwise. Where the teeth mesh, the touching surfaces move together, so the two gears must turn in opposite directions. Gear size changes speed, not direction.

2. An open belt connects two pulleys. Pulley A turns clockwise. Which way does pulley B turn? Two pulleys with an open belt Pulley A on the left with a clockwise arrow, pulley B on the right. An open belt runs straight from the top of A to the top of B and from the bottom of A to the bottom of B, without crossing. A turns clockwise B ?

In words: the belt runs straight between the pulleys and does not cross over itself.

Worked answer

Answer: clockwise, the same as A. The belt does not cross, so each side of the belt pulls pulley B in the same direction A is moving. A crossed belt would reverse the direction; an open belt does not. Contrast with question 1: teeth that mesh reverse direction, a belt keeps it.

3. A 15 kg box sits 4 m left of the pivot. Where must a 20 kg box sit on the right to balance? Balanced beam A level beam on a central pivot. A 15 kilogram box sits 4 meters left of the pivot; a 20 kilogram box sits on the right at an unknown distance d. 15 kg 20 kg 4 m d = ? (not to scale)

Balance means weight times distance is equal on both sides.

Worked answer

Answer: 3 m. Left side: 15 × 4 = 60. Right side: 20 × d. Balance: 20d = 60, so d = 3. The heavier box sits closer, because a bigger weight needs a shorter distance for the same moment.

4. Two boxes sit left of the pivot: 10 kg at 2 m and 5 kg at 4 m. Where must a 20 kg box sit on the right to balance? Balanced beam with two boxes on one side A level beam on a central pivot. On the left, a 5 kilogram box at 4 meters and a 10 kilogram box at 2 meters. On the right, a 20 kilogram box at an unknown distance d. 5 kg 10 kg 20 kg 4 m 2 m d = ? (not to scale)

Moments on the same side add together.

Worked answer

Answer: 2 m. Left moments: 10 × 2 = 20 and 5 × 4 = 20, total 40. Right: 20 × d = 40, so d = 2. Adding the two weights first (15 kg) and guessing a single distance is the trap; each weight keeps its own distance.

Match the distances to the balance equation

Original Prepti teaching visual. Not an official test question.

Original see-saw example: a 20 kg child sits 3 m from the pivot. A 30 kg child sits on the other side. Where should the second child sit to balance?

20 kg30 kg3 m2 mpivot

20 × 3 = 30 × 2 = 60

The heavier child sits closer to the pivot. In the same gravitational field, balancing weight × distance is equivalent to balancing mass × distance here.

Idealized level, rigid, weightless beam; ignore friction. Diagram is schematic, not to scale.

Common mistakes

  • Forgetting that meshing gears reverse direction.
  • Mixing up which side the pivot is on in lever questions.
  • Ignoring units.
  • Spending too long on one item when the test is timed. Check your invitation for the limit.

How to practice

Criteria’s candidate site lists a mechanical aptitude practice test that simulates a mechanical reasoning assessment (Criteria practice tests). SHL lists a mechanical comprehension practice test (SHL practice tests). Our SHL test prep page compares SHL’s free resources and paid options.

FAQ

Is it a physics exam? The owners describe these tests as measuring mechanical aptitude, problem solving or physical principles, not a physics qualification.

Can I use a calculator? Check your invitation.

Do I need paid prep? Start with free owner practice. See how we rank.

Sources

Criteria CMRA and WTMA pages, CMRA info brief PDF and candidate practice tests page; Pearson TalentLens Bennett page; SHL practice tests page; Saville aptitude tests page. Last checked October 15, 2026.

Contact us.

By Prepti Team. Last checked: October 15, 2026.